ST Automotive Glazing

Multi-pole FPC Connectors are ideal for single location connection for multi-segment PDLC roof glass. Our designs support programs where up to 12 track FPCs are necessary, and where the usual high standard polyimide lamination, over-moulding and cabling are critical. We …

Large format FPC connectors enable connectivity directly into the multi-segments of the PDLC roof glass. While large format FPC connectors cost a little more than multi-pole FPC connectors, their use significantly reduces the complexity of the glass, and thus commonly …

Large FFCs are ideal for connection to simple large PDLC glasses, and our designs currently support programs in serial production. We can manufacture Flat Foil Connectors >1000mm in length with single or double copper poles. The critical soldering points can …

These con­nec­tors are used for back-lite heating grid connection. The coils and capacitors pre­vent inter­fer­ence with the anten­na sig­nals. The selection of coils and capacitors is limitless, and all variants are lead-free. Other features include: Location clips which can be …

Primarily used for antennas within back-lites and side glass, crimp contact connectors with round wire are delivered pre-soldered. These light weight connectors are easy to handle, require little space for application, and are inexpensive. All variants are lead-free, with fluxing …

These connectors are used for back-lite heat­ing grid con­nec­tion. The solder bridge and solder preform geometry are specifically designed to deliver perfect process repeatability for our customers, during application to glass. And the material selection is modelled in parallel to …

This is an essential material for manufacture of Wired Heated Windshields. It is used as the near-invisible heating element within the glass viewing area, and is the obvious choice due to excellent tensile strength (even at very high temperatures) and …

Used for both Wired and Coated Heated Windshields, Preformed busbar is specifically manufactured to customer dictated designs and shapes, therefore it is immediately usable within the glass manufacturing process, requiring no manual shaping or folding. Manual shaping and folding is …

For a clean, solder-free busbar connection around the perimeter of Wired and Coated Heated Windshields, we offer a range of Adhesive busbars. For the first layer of busbar directly onto the PVB, we manufacture a pressure-sensitive “normal” adhesive variant. For …

For a proven busbar connection around the perimeter of Wired Heated Windshields, we offer a range of Solder busbars, which can be applied directly to the PVB as a first layer, and also directly over the heating wire as a …